Computer speed. How to speed up your computer

Every Windows user knows right awayAfter installation, the system works quite quickly, but over time, it accumulates a huge amount of garbage, the presence of which begins to slow down the OS in a fairly high degree. How to speed up the computer, read in the material below. The proposed methods are quite simple and do not require any special knowledge and skills from the user.

What determines the speed of the computer?

In general, for some reason, it is considered thatThe performance of any computer system depends mainly on the “iron” components that are installed in it (processor, RAM, graphics card, etc.).

In part, this is true, but notIt is worth discounting the software components, which in the process of interaction with the installed equipment can also play a significant role.

How to check the speed of the computer?

As for checking how yourcomputer, you can simply open the "Task Manager" and look at the performance tab. This will display information about the load in real time, including processor utilization, RAM, network connectivity, or hard disk access.

Also look at the speed of the computerIt is possible through the properties of the terminal, where, as a rule, a performance evaluation will be immediately shown. If it is not there, you can simply go to the system section, which is located in the "Control Panel" and ask for testing there. But note that the total score is set at the lowest grade. That is, if you have a powerful processor onboard and a huge amount of RAM, but an outdated hard disk, this does not mean that the system will work in the optimal mode for which it is designed.

Physical methods of increasing productivity

Of course, all novice users start.look for the source of all troubles in the "iron". This is not always correct, although there is some sense in this. As applied to stationary terminals, it is that with time a pile of dust accumulates in the system unit, due to which the contacts on the motherboard may be loose. In this case, it is recommended to simply clean the filling, using the most common vacuum cleaner with the included minimum suction mode.

On the other hand, the speed of the computer,Of course, you can increase by installing a new processor, adding memory strips, etc. But here you need to take into account one nuance: if, say, a new processor has a performance relative to the old one is no more than 30%, you will not get a tangible result, no matter how hard you try. The same applies to the memory strip. If you set the slats of the wrong standard, especially if it is not supported by the motherboard itself, the effect will be zero.

Software methods

But despite all this, there are many waysincrease the speed of the computer and software methods, which many often simply forget. So, in the list of all that can be excluded when using Windows, you can consider such elements as:

• autoload;
• unused or unnecessary system components;
• drivers;
• paging and hibernation files.

It is clear that it will free up space on the hardyou should not forget about the disk itself. It is recommended to check the system partition at least once a month for errors, and also to perform defragmentation. Just this process allows to move executable objects of frequently used programs or opened files to the fastest areas of a hard disk, after which access to them will be accelerated.

Disable unnecessary startup items

But let's see how to increasecomputer speed in a slightly different way. For those who do not know, it is worth saying that many system or user processes are able to start when the operating system starts, which causes additional load on resources, since all executable files or dynamic libraries affect the processor and RAM in one way or another.

In this case, it is recommended to usewith the msconfig tool, enter the system configurator, go to the autoload tab and disable all the elements that are there (this applies to systems of versions seven and below). In the case of, say, with Windows 10, you need to initially call the Task Manager and find the necessary tab there.

Deactivating unused services

The performance of a computer with Windows 10 or otherthe system may also be connected with the fact that in the system itself, too many background applets are enabled by default, which simply load the processor and RAM, constantly being in an active state. For example, why keep the service and print manager enabled if you do not have a printer. Why do you need an activated Hyper-V module if you do not install virtual machines?

The question is how to increase the speed of the computer,in this case, it is solved by entering the program and component section where all unnecessary services are disabled in the Windows components. After that, the system restarts without fail.

Drivers

Drivers of all installed devices also playfar from the last role, being a kind of bridge between themselves, the operating system and programs that can access them in the course of their work. Just due to the fact that the device drivers will be up to date, the speed of the computer can increase significantly. It is clear that there are no such tools in Windows, and updating the drivers through the same “Device Manager” is deadly. So is it not easier to use the tools specifically designed for this?

One of these can be called the program DriverBooster It, however, in its work requires that the user has an active internet connection, but when downloading drivers and integrating them into the operating system, it refers exclusively to the sites of developers or equipment manufacturers, which completely eliminates the entry of viruses and malicious codes into the system.

Disable the paging file

How to adjust the speed of the computer with anothermethod, it will be clear if you enter the system settings and see how much virtual memory is involved, which is nothing more than a place reserved on the hard disk where program components are unloaded when there is a shortage of RAM.

For what the system itself offers, you can evendo not mention it. For example, if there are eight gigs, the paging file in the automatic representation has a volume of about one gigabyte. In fact, virtual memory reserves space for itself in the system partition about three or four times more. So do not be afraid to disable the use of virtual memory. At least, when starting the program, the call will be made to the RAM, and not to the hard disk.

Disable Hibernation

The hibernation file is one more worm thatdevours system resources and free space in the system partition. The essence of his work is such that when you switch to the appropriate mode, a full copy of the RAM with all the processes and settings hanging in it is written to it. The more RAM, the more programs launched when switching to this mode (and it is used by default in the latest versions of the system), the more hard disk space it takes. To get rid of it, manual removal is not required. It is enough to call the command line with admin rights and enter the combination powercfg -h off in it. Please note that the console may give an error if you run it without administrator rights. If this happens, go to the System32 folder and open the executable file through PCM.

Optimization software

Finally, the question of how to speed up a computer may have another solution, which is to use software methods specifically designed for this purpose.

Of course, in this case we are talking aboutapplications optimizers, in which there are not only modules for cleaning the system from the accumulated debris, but also for correcting invalid registry keys, detecting unwanted software, and much more. For example, the program for computer speed Advanced SystemCare has several modules available that can be turned on or off to perform quick scanning and fix problems. Of course, this is not all that she is capable of. But on the other hand, such a program for computer speed has its advantages in that it allows you to select the necessary cleaning modules and, if necessary, even defragment the system registry.