Backlight in the kitchen: how to draw LED convenience and comfort

The art of lighting, that is,premises, is capable not only to dramatically change it, but also to break it into separate zones in order to improve the decorative and functional components of the premises as a whole. The lighting in the kitchen fully meets the solution of these problems. If you add to them the factors of reliability and security, better than LED backlight is not found.

On the one hand, modern kitchenmultifunctional: cooking is here, a family meets at one table, friends and girlfriends are invited for a heart-to-heart conversation. On the other hand, the interior of the kitchen during the cooking process is exposed to the effects of temperature and moisture, contaminated with fat drops. Properly located and protected LED lighting in the kitchen is not afraid of anything.

First of all, care should be taken to ensure thatwas qualitatively illuminated the functional area (table top), where the products are processed. It is clear that the lighting should be bright, uniform and clean, and most importantly - white, so as not to allow distortion of colors. If LED lighting of the kitchen with its own hands starts from here, practice will appear, and further work will proceed more easily.

For light sources, it is better to take LEDs orribbons giving a cold white glow. They can be fixed on an aluminum profile, which is glued to the underside of the pendant lockers above the countertop. Required is a transformer that transfers the high voltage of the mains to a low voltage, from which the LEDs are powered. You can place it in one of the lockers.

Tip: in all cases, before you make a highlight in the kitchen in the final version, try out how it works. If it does not light up, check the quality of the wire connections and the correct polarity of their connections on all sections of the circuit. This is especially important if the illumination design is made in a multi-module version.

Remember: The transformer can not be connected when it is live. None of the wire connections should be bare. If you do not have experience working with high voltage, ask for help from someone who is well versed in it.

What is the advantage of LED stripfrontal luminescence? In that it is hidden inside the silicone cover, which does not affect the strength and color of the lighting, but completely protects the LEDs from the unfavorable factors created by cooking.

In the same way, lighting is organized in the kitchenabove the cupboards, under the cabinets and the table top, on the ceiling, along the perimeter of the ceiling, on the walls, etc. With the only difference is that the color can already be varied in a wide range. Changing it, you can achieve the creation of a mood appropriate to the moment: family comfort, home holiday, friendly gatherings, sensual intimacy ... A reasonable and harmonious blending of colors can give a very unusual and fresh effect.

In addition to all of the above, as you could alreadyto notice, LED lighting in the kitchen gives a lot of benefit: with equal lighting power and completely scanty compared to other fixtures, the place for installation, LEDs save up to 80% of the energy consumed. And if all the backlight elements are mounted correctly and reliably, it's completely safe to use.