Backlight for cabinets in the kitchen

How to properly build a home lightinginterior? It's no secret that it's the light composition that helps to give the room an indescribable atmosphere and mood. It is also with the help of lighting, you can split the room into zones, each of which has its own purpose. A successful lighting solution for each individual room of the apartment is selected in accordance with the function performed by the premises, and in accordance with the personal wishes of the person who will later live in this apartment. Perhaps, some changes in the light interior will be desired by the person, without resorting to major repair of the zone. Lighting under the cabinets in the kitchen, mirrors with special lighting in the bathroom, LED strips in the furnishings of the bedroom and living room are some possible options for what a person can easily do, giving the interior a certain mood and atmosphere.

Backlight functions in the interior

The highlighting of certain areas in the kitchen can carryonly decorative designation, but it is much more useful to plan the layout of additional lighting in advance in order to ensure its functionality. The easiest way is to make the lighting in the kitchen under the cupboards with your own hands. It is performed using an LED strip, and its main function is lighting the countertop. Also, the LED strip is used to illuminate the area under the drawers and inside the boxes - for more convenient use of space, and to impart a certain character to the kitchen area, if the lighting is mounted near the floor level. The lighting under the cabinets in the kitchen is one of the most common solutions for the design of this room, also the LED lighting of the eaves in the kitchen, the highlighting of certain niches, the imitation of the bar counter in the kitchen area are no less spectacular.

What is LED strip?

LED strip - quite new and veryAvailable replacement is difficult for installation of lighting systems. It is a flexible tape on which semiconductor elements are permanently fixed - LEDs.
The use of LED tape is safe: it does not contain fragile and dangerous elements, it is simple enough for installation and further application and provides the necessary norm for illumination and illumination. That's why with its help the lighting for the kitchen under the cabinets is carried out. LED strip exists in various varieties: one-color or multi-color, modification, protected from moisture and dust, varieties with different sizes of LEDs and their number, as well as varieties that require different electrical voltages and operate directly from the network.

When choosing LEDs to illuminate the cabinet onthe kitchen should also pay attention to such characteristics as the color of the base of the tape, heat-resistant and moisture-proof qualities of adhesive tape. Usually LED strip provides enough light to remove shade from wall cabinets.

The nuances of working with LED tape

What is important to remember when working with LEDtape and its installation when provided lighting under the cabinets in the kitchen? First of all, the tape can be cut and soldered only in special marked areas. On a single-row tape, these sites are located every three diodes, on a double row one every six. To connect sections of such a lighting device, special connectors may be required, as well as for installing some types of tapes, special power supplies may be required. They are necessary because it is the low-voltage direct current that is suitable for LED strips when the lighting is installed for the kitchen. Under the cabinets with a socket hides the power supply, which will later be connected to the network. The power supply is selected according to the following calculations:

Power unit power = Belt length * Power of 1 meter of tape + 20% in the form of power reserve.

When connecting the lighting device to the unitpower is worth remembering the polarity. If it is necessary to install several large pieces of LED strip, it is important to prepare for each a separate power supply unit or power the segment from it separately. By connecting these segments in series to each other, one may encounter such a situation when the next segment will give too dim light and quickly fail.

Multicolor led strip

When using multi-color LED stripsYou can also use a controller with a control panel, which allows you to customize the lighting program, change colors, add various effects, such as flickering.

Kitchen lighting under the cabinets: photo

There are many design options.working space of the kitchen with the help of such lighting. You can set up a multicolor system with your own hands, the lighting in which can vary depending on the program installed on the controller or manually. Also the LED thread can be imperceptibly fastened under the cabinets, performing a decorative function. The backlight for the kitchen under the cabinets LED corner can be installed using a special corner aluminum profile, which is purchased in hardware stores and supermarkets.

How to install LED strip in the kitchen: the necessary preparations

LED tape required for installation(the most pleasant and relaxing is the warm white light), the power supply for LEDs, the connecting wire and the power cord with a plug. Even before the acquisition of such a lighting device, it is important to make appropriate measurements of the space on which the tape will be fixed, and the distance to the table top. This will allow you to choose the correct length and power of the device. The place where the lighting is installed under the cabinets in the kitchen, it is desirable to wipe with alcohol and wait a short time for it to evaporate - this simple procedure will remove dirt and firmly glue the tape in the future. If the contamination is too strong, the structure can be strengthened with the help of connecting clamps or it can be installed on a special aluminum profile.

How to install LED strip in the kitchen: fixing

Lighting for kitchen under cabinets - LEDtape is attached to a double-sided tape, while you need to control the reliability of its attachment to the tape and to the surface of the wall or cabinet. After installing the lighting, you must connect it to the power supply. LED strip with respect to polarity is connected to the power supply, and then it is connected to the network. It is important to remember that after the work done should not remain bare wires, and during the connection to the unit it should not be under voltage. After final installation, the structure can be connected to the network. If all actions were performed correctly, and the polarity is not reversed, the tape will begin to glow.