How to lay the paving slab at the cottage correctly

Today we will talk about how to lay the paving slab at the cottage. You can do it yourself and with minimal costs.

With the help of paving slabs you can easilyto ennoble your country plot. It does not require much effort from you, but it will serve a fairly long period. We are ready to disclose to you the secret of how to properly lay the paving slab with your own hands.

First you need to define the color and shapetiles. Then choose the style of styling. Nowadays, there are many ways of laying tiles, but the most popular is the way "pavers". You can lay the sidewalk tile in the country house on a variety of different schemes: "bricklaying", "herringbone". It all depends on your imagination.

How to lay the paving slab at the cottage correctly?

We need to prepare a place where the tiles will be laid. To ensure that the tiled surface is flat, follow the rope stretched over the pegs and outline the place where the work will be done. The rope should be placed at the height where, according to your submission, the edge of the curb will be.

Then you need to dig a trench with a shoveldepth (15 cm). Take care that the roots do not remain in the trench. These trenches are intended for installation of a border. Next, the bottom of the trench should be compacted, this can be done with a simple log. Then we should make a sand pillow 5 cm high at the bottom of the groove. After that, we need to mix concrete at the rate of 1 part of cement for 5 parts of sand-gravel mass. Next, you should put the border cuts as tightly as possible to each other and pour concrete at the base of the curb.

In the resulting place between the bordersmake the main pillow. The first layer of it is a slag or gravel, the second layer will sand. The basis should be done especially carefully, since it is laid on the pavement itself, and it will depend on the appearance and life. So it's worth trying at this stage, then to tell your friends about how to lay the paving slab at the dacha.

It is recommended to make a base with a smallslope for better drainage of water. Sand should also be slightly compacted. When the base is ready, you can start laying the tiles. To do this, mix cement and sand with water and gently spread the resulting mass over the entire surface of the pillow. Mix the mixture on the "eye", the main thing is that it does not spread. Laying start from any corner of the site and move diagonally from the curb to the curb. Pieces of tiles that do not fit can be cut with a bulgarian with a special circle for the tiles. Do not start laying tiles without a level and rubber hammer. Do not forget to leave gaps between the tiles, because depending on the weather conditions it has the ability to expand and contract. After laying, sprinkle the surface with sand and notice it in the gaps between the tiles. So it will look more beautiful, and sand serves as an obstacle to the grass, which will greatly spoil the look.

Thus, we answered your question about how to lay the paving slab at the dacha. Good luck!