Decorative facade putty - the simplest method of finishing
Facade putty is one of the mostsimple ways of finishing the exterior elements of the building. It has excellent protective and aesthetic qualities, which makes it particularly practical. In addition, special additives, present in its composition, endow the composition with anticorrosive properties.
Work with the above material does not requirespecial skills and abilities. It's enough to make a little effort and have patience - and you can cut repair costs by excluding an article for a repair team.
Facade putty has excellentindicators of moisture resistance and frost resistance - all due to improved physical and mechanical properties. Thanks to such indicators, it reliably protects the treated building from moisture penetration and withstands many freeze-thaw cycles. It should also be noted that this material has an exceptional vapor permeability, which prevents the formation and spread of various fungi. Due to this property, the facade putties contribute to the prolongation of the life of the building.
Depending on its composition, the solution can resist forces up to 50 kg / cm2, this is a sufficiently reliable protection against damage. In addition, in the practice of many construction companies, decorative putty is used as a thermal insulation material. Studies have shown that using such a material can reduce energy consumption for heating the room by almost 50%. This is due to the fact that the output of the heat resource from the room is reduced. Due to this, the heat transfer coefficient of the building as a whole is reduced.
Facade putty does not needspecialized care. It is enough to wash it with water with a usual cleaning agent dissolved in it. This is also a feature and an undoubted advantage of such putty in front of others.
1. Textural.
2. Soundproof.
3. Mechanical.
4. Moisture-resistant.
5. Fire-resistant.
Facade putty due to its simplicitycomposition is considered several times cheaper than its counterparts, which makes its use not only practical, but also economically profitable. However, in order for the putty to serve you for a long time, you need to follow a few simple rules. Here are some of them:
1. Before applying the composition, the surface to be treated should be thoroughly cleaned and primed. This will help avoid exfoliation and chipping.
2. Apply a coat of varnish or paint over the putty. Such a coating will increase the elasticity and strength of the lower layers.
3. Do not apply a single layer of putty depth of more than 3 cm, because in this regard, deteriorating quality indicators, and financial costs are significantly increased.
4. If you need to provide sound insulation or refractory putty, then you should not save by buying conventional finishing mixes. It will be much more effective to find and purchase specialized compounds.
