Canon PIXMA iX6540 Printer: overview, specifications, reviews

Computers

Canon Pixma iX6540 is a photo printer withthe ability to output high-quality images in A3 + format. At the same time, it has quite acceptable technical specifications and affordable cost. It is about this peripheral solution from the eminent European manufacturer that will be discussed later.

canon pixma ix6540

Positioning

Canon Pixma iX6540 printer is based on inkjetmethod of printing. Its key features are low power consumption and excellent quality of output documentation. But at the same time the performance leaves much to be desired. Expenses for consumables are minimized. Separately, it is necessary to note the dimensions of the media, which can be even A3 format. As a result, it can be noted that such a printing tool is most optimally used in design bureaus or design organizations, in which the highest quality requirements are put to the quality of documentation.

Equipment

The following components are equipped with Canon Pixma iX6540:

  • The printer itself is based on the inkjet printing method.

  • Original set of branded cartridges.

  • Power cord with an external unit for the implementation of the power supply system.

  • Disk with a full set of software. And it contains not only drivers, but also various test and diagnostic software. Also on it you can find all the important documentation.

  • The user's manual and, of course, the warranty card complete the documentation delivery package in paper version.

The interface cord is not included in the delivery list,which the new owner of such a peripheral means is forced to buy separately. Also, this solution does not have a built-in CISS - it must also be bought separately and, as you might guess, for an additional fee. These are two significant drawbacks of the printing factory in question.

printer canon pixma ix6540

Paper. Speed

Canon Pixma iX6540 printer can print on any paper whose density is limited to values ​​from 60 g / m2 up to 300 g / m2. The largest carrier size, as it was beforenoted, - A3 +. On the output of one such picture this device will spend 120 seconds. If the format is reduced, the output speed will increase substantially. Another factor that can improve performance is simplifying the output. For example, if text is displayed instead of a picture, then the speed will also increase. The resolution of the output documentation is 2400х9600, and the point size does not exceed 1 pl.

Cartridges

Cartridges for the Canon printer of this model can be:

  • CLI-426Bk - standard black, comes as standard.

  • CLI-426C - blue, also included by the manufacturer in the original supply, like everyone else.

  • CLI-426M - purple.

  • CLI-426Y - yellow.

Also there is an improved monochromatic cartridgefor Canon printer - PGI-425PGBk. He has a print resource doubled in relation to the standard CLI-426Bk. It must be purchased separately, but it makes sense only if the resource of the base is developed. Again, the cartridges in this case are non-refuelable, and in order to solve the problem with the accessories, it is recommended to equip such a peripheral product of CISS.

cartridge for Canon printer

Ways to connect

Universal solution from the connection pointis the Canon Pixma iX6540. The overview of the supported switching ports first of all indicates the presence of a USB connector in version 2.0. Also it is compatible with any other revision of this interface, from 1.0 to 3.1. This unit is also equipped with an RJ-45 port. With its help, this printing subsystem is able to connect directly to the computer network and independently perform the functions of the print server without involving any other additional computers. But the support for wireless Wi-Fi, which is now gaining popularity, in this peripheral device is not.

Tuning algorithm

Consider how to configure this printing solution to the USB port. It consists of the following stages:

  1. Extraction of all contents from a cardboard transport box.

  2. Installation near a PC.

  3. Perform all the connections necessary for the normal operation of the printing system.

  4. Turn on the computer and the printer connected to it.

  5. Install the complete set of cartridges.

  6. Then, after the PC has been downloaded, install the drivers and other necessary software.

  7. The next step is to reboot the computer.

  8. After that, you need to print a test page.

canon pixma ix6540 review

The cost. Reviews

Now for 11500-12500 rubles you can buy invarious outlets of Canon Pixma iX6540. Reviews in this case is quite justified such a cost. This solution has really good technical specifications, and for its niche in the form of design or design organizations, it just perfectly suits. The disadvantages of this printer are:

  • The trimmed package in which the manufacturerdid not turn on the interface cable. But now most manufacturers believe that potential buyers already have such an accessory in stock. Well, there should not be any problems with its purchase in case of absence. Such an accessory is in every store, it is not difficult to buy it. The very same device is not too expensive and expensive.

  • Absence of built-in CISS. A possible solution to this problem is the installation of an external such system. In this case, you will have to make certain investments, and this will significantly increase the cost of the printing subsystem. But in the future, such investments will lead to a reduction in the cost of consumables.

The strengths of the printing system include:

  • Support for large formats with sizes of A3 +.

  • High speed.

  • Quality printing.

  • Advanced set of connection methods.

canon pixma ix6540 reviews

Conclusion

Of course, there is a Canon Pixma iX6540 printercertain shortcomings, but they can hardly be called essential language is hardly turned. There is also a solution and advantages. The main one is support for A3 + and A3 formats. It is this circumstance that indicates that such a printer is primarily aimed at use within various design bureaus or design organizations. Another possible field of application of such a printing device can easily become a copy center. But in order to fully disclose the possibilities of such a decision and reduce the costs of its maintenance to a minimum, it is necessary to equip it with CISS. In the rest it's just an excellent printer at a very reasonable price.