Pattern of mittens for all occasions

During many types of work it is necessary to protectarms. For something fit thin latex gloves, and for something - good-quality mittens. Everyone decides for himself what to choose. The pattern of mittens will come in handy so that, without running around the shops, get a comfortable pair to protect your hands.

Not only mittens!

From childhood I remember many fairy tale "Mitten". A man walked out of the forest and lost his gauntlet, and the little animals found her and began to live there. So, the man lost his mitten, and not a mitten. And that makes all the difference. Children’s and women’s winter clothing items that protect hands from cold and wind are mittens, while men’s work gloves are mittens. Their pattern is simple enough to be able to sew such products at home on a typewriter or by hand. Even those who have little experience in tailoring will cope with this task. What is the difference in the cut of mittens and mittens? Only in size and materials. Pattern gloves workers, toAk and elegant winter mittens will be simple. You can build it yourself or find ready-made templates on the sites of needlewomen.

From theory to practice

The pattern of mittens is built to the size of the hand. To do this, on a piece of paper it is necessary to cut the contours of the palm, noting the location of the thumb. Then make two increases: for loose fit (1.5 cm) and seam allowance (1 cm). Then circle the thumb on another piece of paper, marking the place where it connects with the palm. Exactly the same need to make a mark on the first sheet, then draw a brush in a mirror image.

If you need not only durable, but also warmthe product, the pattern of mittens from fur will be built in the same way. However, she has a few additional points. This will be discussed in more detail below.

Sheepskin - in the case

The pattern of work gloves is built enoughIt is easy, but in its manufacture it is necessary to take into account the material from which they will be sewn. Often they are made of sheepskin. It is a good material, warm, soft and durable. And in order for the hands to be comfortable in sheepskin mittens, their pattern should take into account the thickness of the fabric, which means that along the contour of the pattern one should add another half an inch. However, from sheepskin sew mittens not only for work, but also for the winter, very warm, elegant. They can be embroidered or trimmed with fur. Such mittens are cut and sewn according to a similar pattern, but then you should not make an increase in the freedom of fit, so that they fit well on your hand.

If you need to work

Most often the pattern of mittens is constructed extremelysimply. It consists of only two parts: a palm and a separate thumb. But sometimes it is necessary to make a more accurate pattern so that the mittens fit the brush well or make it convenient to work in them. Pattern of three-toed mittens is built like workers, it only takes into account the index finger. Therefore, the template will have to do a little more. In order for the glove to tightly fit the wrist, it is necessary to insert an elastic band into the drawstring. Another way is to sew a knitted cuff.

On fur

Fur mittens pattern will not be anythingdiffer from a simple template. If the material is thick and dense, then you need to add an allowance for free fit. If the fur is rather thin and soft, then it is only necessary to make an increase for the seam. Cut out such products should be so that all the details of the vill lie in one direction.

You can sew mittens in several ways. And the pattern of mittens from fur can be next.

In several layers

Sometimes double mittens are needed, warmer in them, they areDo not get wet quickly and dense enough. The pattern in this case, all the details will be the same. However, if the inner material is volumetric, then the pattern of the outer part should be slightly wider than the inner one. To do this, you can remove half a centimeter to the free fit when cutting the inside of the mittens, or, conversely, add half a centimeter along the contour for the outer part. It all depends on the specific situation. Here is a very simple pattern to make.

Sewing rules

So, the pattern of gloves from fur or from anyanother material is built, now they need to cut and sew. When cutting, you should consider the future use of mittens. If these are just working mittens, then they need to be made a little wider, although not too much convenient for them to work. If necessary, an additional element of leather or special rubber is cut and sewn onto the part of the PDA. This is done so that the gloves do not slide on the surface during work.

There are some nuances in tailoring mittens made of furor sheepskin. Very often, such material is sewn on the front side. The seam turns out external and has to be the most accurate, from it threads should not stick up. The fur is cut in a pile in one direction, even if it is inside the mittens. Fur or sheepskin lapels can be sewn separately, having cut out an additional detail, and you can immediately provide them for the main pattern.

Work gloves are often sewn from thick fabric,for example, tarpaulin. The peculiarity of sewing this type of product is to remove the seams, otherwise they will rub the skin during work. Therefore, it is necessary to use a stitching line or manually make a flat seam.

Mittens - a necessary thing in the economy. They will protect hands from frost, wind, moisture, as well as from bruises, cuts and aggressive substances during the various works. According to the proposed patterns, you can sew not only working gloves for men, but also kitchen gloves, as well as bags for Christmas surprises for children. In fact, mittens - a necessary thing in many situations, because they so often help us out.</ span </ p>