Ceiling of the ceiling with water-based paint yourself: step-by-step instruction

Home cosiness

Decoration of country cottages orapartments is a rather complicated construction process. He envisages the need for a special approach and the wizard has special skills. In order to save money, people recently try to make repairs with their own hands, among other things, this allows them to gain new experience. This is also true for homeowners who plan to tackle the dyeing of residential premises.

At finishing of surfaces water-based paint is often used. It has an affordable price, and its quality has made products popular with consumers.

Reviews of water emulsion

whitewash ceiling water-based paint do it yourself

Whitewashing the ceiling with water-based painthands, according to the house masters, can be performed by almost any person. However, you must first familiarize yourself with the qualitative characteristics of these products. It has many advantages, among them we can distinguish a short stage of drying, as well as harmlessness and safety for human health and the environment.

During the work the master can remain insidepremises as long as necessary, the composition does not have a specific smell that would persist for several more weeks after completion of works using alternative solutions. As users emphasize, the described composition can be given almost any color using special pigments. Visiting the store, you can find a colorless composition, which offers a wide range of colors. Whitewashing the ceiling with water-based paint with their own hands is not accompanied by particular difficulties, tools after the completion of painting, as practice shows, are quite easy to clean.

For reference

The disadvantages of water-based compositions are much less. For example, staining can be carried out only at a positive temperature, which has risen above 5 °.

The choice of water-based paint

Today the most commona variety of water-based formulations is acrylic. Acrylic resins act as the main component in the material, among other things, latex is added to the ingredients. This compound allows paints to actively resist the effects of moisture. After drying, the surface can be washed with water, without fear that the layer will be damaged. Manufacturers emphasize that the ceiling will be able to transfer up to 5,000 manipulations on washing the surface. If you apply a double layer, it will be possible to mask the cracks, the thickness of which reaches 1 mm.

Silicone or silicate paint

whitewash ceiling water-based paint on their own

Whitewashing the ceiling with water-based painthands can be carried out using silicone compound. It contains silicone resin. The cost of production is somewhat high, but the mixtures are suitable for mineral coatings and can disguise cracks up to 2 mm. With the help of silicone paints, it will be possible to create a vapor-permeable coating, so the paint can be used on wet surfaces, as well as on substrates that are exposed to moisture. After applying the composition, you can forget about the appearance of the fungus for a long time.

Silicate paint is a solution consisting ofwater composition, colored pigments and liquid glass. The ceiling after drying will acquire the quality of vapor permeability and resistance to external influences. These coatings are ready to serve for 20 years.

When to choose a mineral water based paint

Whitewashing the ceiling with water-based painthands can be carried out and with the help of mineral composition. Cement or hydrated lime is present in such mixtures. It is possible to use paint on any surfaces, but painting work on brick or concrete foundations serves as the main purpose. As a minus of such paints serves a short life. But there are many advantages, among them it is worth highlighting the possibility of dilution with water, as well as recommendations for working in enclosed areas, under which conditions suitable for a person working conditions will be preserved.

Ceiling preparation

how to paint the ceiling with water emulsion

If you need to update the ceiling, paintingwater mixture can be carried out by yourself. However, before starting work it is necessary to prepare the surface. The base is freed from the layers of old paint or whitewash; for this, the ceiling is moistened with water using a paint roller. This applies to lime and chalk whitewash. As soon as the material is softened, it can be scraped off with a steel trowel or chisel. At the final stage, the ceiling should be washed with a sponge.

Removing a layer of old paint

whitewash water-based paint do it yourself reviews

Water emulsion on the ceiling can be appliedonly on a clean basis. In order to facilitate the cleaning of the ceiling, the old coating should be moistened with a large volume of water, using a foam roller or sprayer. This procedure is repeated twice; the interval between approaches may be approximately 20 minutes. Once the moisture is well saturated, a draft should be created by opening all windows and doors. This will create blisters that can be removed with a spatula without much difficulty.

In order to cope with the work as much as possiblequickly, you should scrape off the old coating until the surface has dried. After stains and rust are treated with a solution of copper sulfate. It also happens that hard-to-remove stains remain on the ceiling, for which you can use a solution of hydrochloric acid, which is prepared in three percent concentration. It is important to exclude its hit on the skin. Stains are wiped with this solution.

An alternative solution would be a grinded solution.lime, which is diluted in linseed oil. The ratio of ingredients is 20 to 1. Sometimes a solution of lime and water is used, to which denatured alcohol is added. It will need about 50 ml. The last two mixtures should be used separately, one should be applied to the pollution, leaving for 15 minutes. Repeating these manipulations is necessary until complete removal of the problem areas.

Alignment

Recently becoming increasingly popularwhitewash ceiling water-based paint with their own hands, step-by-step instructions for the work presented in the article. It will allow you to understand what technology to carry out the work. So the next step is alignment. To do this, apply to the surface a thin layer putty, which has a high level of adhesion. After drying, the surface is ground with fine-grained sandpaper. Alignment before the subsequent application of the water emulsion can be accomplished by creating a layer using putty whitewashing, which has an oil-adhesive base. It should be spread over the surface with a spatula, brush or roller. In the ceiling, all the cracks and cracks are sealed, but before that they need to be slightly widened. Before painting the ceiling with water-based paint, it should be primed, for this the paint is applied as thin as possible, and then left to dry.

Preparation of tools

To perform the painting of the ceiling should prepare some tools, namely:

paint brush;
fur roller;
ribbed surface for paint distribution;
narrow brush;
a bath under the paint.

Paint brush is useful for painting jointswalls and ceiling. With it, you can paint the corners. A narrow brush is useful for correcting the applied layer. The main surface will be painted with a fur roller, which must have a long nap.

Features of staining

When the ceiling paint selection is made, andSurface preparation is completed, you can start painting. It is important to take into account the direction of the light flux. This will prevent the formation of streaks from the brush or roller. Painting should not start with the corners and joints between the ceiling and the wall. The first is painted a long angle relative to the entrance door. A wide paint brush should be moistened in the paint by half, and after a little squeeze to remove excess. Along the perimeter it is necessary to process the ceiling, creating a strip with a width ranging from 3 to 5 cm. With further painting, this will prevent damage to this zone during use of the roller.

Recommendations of a specialist

Whitewashing the ceiling with water-based painthands, reviews of which only the most positive, is carried out with a roller on the main square. The first layer should be applied in the direction of the rays of light that fall from the window. The direction of the second layer will be perpendicular. The last layer is directed towards the window opening. In the intervals between the application of paint, the paint should dry well, which takes from 8 to 12 hours.

Conclusion

Whitewashing the ceiling with water-based paintforces are most often carried out in several layers, for the last of them it is recommended to apply a new roller, which will allow to form a uniform surface.