Faced with some new concept, a personLooking for an answer to a question related to him. One day, one of them might be the question of what registers are? In this case we are talking about an element of the heating system, which consists of one or a number of smooth-walled pipes. Between them they are connected in parallel. The register, in one form or another, is the basis of most radiators. It turns out, the heating battery is a register to which (in one form or another) are attached metal elements. This allows to significantly increase the heat transfer area.
What are registers and where can they be used?
This element can be an ideal tool forheating not only in technical and industrial buildings, but also in private homes. They are widely used to heat small apartments, as well as separate rooms equipped with autonomous heating systems. This is due to the fact that such decisions are usually considered effective only when there is a sufficient amount of coolant in them, the return of which is high in due measure. A large volume of coolant in autonomous systems requires a considerable amount of heating energy, as well as a long time for cooling, and this ensures a long transfer of accumulated heat to the room. Pipes of large diameter, but with limited length, make such systems more reliable, compact and economical.
Speaking of what registers are, you should comparethe efficiency of heating rooms with their help. It is important to note that it is slightly lower than conventional radiators. This can be explained by the fact that the heating registers do not have an additional metal area. However, the possibilities of using them and ways to increase the heat output have a very significant range. It is possible to fasten additional metal plates to the smoothbore pipe during the manufacture of heating devices, which will increase the heat transfer at times. If you use general purpose registers by connecting in parallel a lot of thinner tubes, you can not only create an effective system, but also give it decorativeness. They are sometimes called design radiators of tubular form, but are used for decorative design and as heating devices in public buildings.
Understanding what registers are, you cannote that these are usually pipes with a diameter of 32 millimeters or more. That is why in heating systems, the main lines made of smoothbore pipes can already be considered registers.
Application
Since the registers are severalpipes placed in parallel and connected to each other, they can be successfully used in autonomous heating systems of both single-tube and two-tube systems. It is appropriate to use them in homes with any number of floors. Increased strength allows you to set registers in rooms with a central heating system.
