We make the installation, the rack ceiling at which it will look stunning

Already invented a large number of the mosta variety of new products that are widely used in construction. And floor coverings, and facing materials, and decorative elements - all this delights and pleases the eye. This article will discuss what you can see with your head up. Rack ceiling, the installation of which is not so laborious, began to gain more and more popularity among fans of something original. Basically wizards install them during the repair of bathrooms and kitchens.

If we take into account the slatted ceiling "Albes" made of aluminum, we will see a number of advantages.

1. This type of ceilings is neutral with respect to temperature differences and humidity. Naturally, most often when choosing a place where to make the installation, the rack ceiling is installed in the bathrooms.
2. Taking into account the factor that this type of ceilings still belongs to the category of suspended, with the help of it you can hide all the irregularities of the main surface.
3. Easy installation. Rack ceiling can even be installed independently.
4. The material used for this ceiling is environmentally friendly.
5. Spectacular design.

As mentioned earlier about the installation, rackthe ceiling is quite easy to install yourself. The main thing is to follow the instructions and understand all the nuances. First of all, it is worth noting that the ceiling is mounted at the very end of the work. In other words, you first need to plaster the walls, complete the flooring, install windows and doors. If there are cables and wires, then they need to be fixed so that they later

no interference.

In order to successfully make the installation of railceilings, you will need the following tools: tape measure, screwdriver, drill, level, metal shears. Do not forget about the materials that will be needed in order to make a better installation. Rack ceilings are created using suspensions, panels, dowels, screws, profiles and traverses.

So, the main nuances are considered. Let us turn to the installation instructions.

1. First you need to do all the requiredCeiling measurements and install profiles. Suspended construction should be lowered about ten centimeters from the main surface. In that case, if the guide profiles will be a little long in size, they can be cut with scissors.
2. Profiles should be mounted on pre-drawn lines. At the same time, screws and dowels are used as fasteners. It is worth knowing that it is necessary to mount them with an approximate step of fifty millimeters.
3. After the corner of the room has been reached, the profiles should be fixed and checked for evenness with a level.
4. Then you need to make measurements in order to secure the suspensions. The distance should be about one meter.
5. Using a drill, it is necessary to make holes and fix the suspensions using screws and dowels. After that, you need to check how smoothly the installation was done.
6. It should be fixed traverse. The installation distance must not exceed one meter.
7. After the traverses are successfully secured,you need to check them with a level. The whole structure should be perfectly flat. And only after all the checks it will be possible to proceed to the installation of the panels.
8. After freeing the strip panels from the protective film, they should be installed. All elements will snap into the traverse.

That's all! Fully assembled. Rack ceiling can now delight and delight guests and apartment owners.